Medium  Returns & Cancellation Policy  
Glass Kilns

Bead & Small Kilns

Bead Annealing Information                 Electric Shock Information
ALL KILNS IN THIS SECTION OPERATE ON 120volt, 15amp ELECTRIC, SOME REQUIRE 120volt, 20 amp POWER. ALL KILNS IN THIS SECTION (except the Chili Pepper Bead Annealer and the Paragon 'Blue Bird') WILL FUSE, SLUMP, & ANNEAL GLASS & WILL FIRE PRECIOUS METAL CLAY (PMC).


Jen-Ken Kiln Fuse Box
    Jen-Ken Kiln Fuse Box
    The lid and bottom are not attached.
Jen-Ken Kiln.

Fuse Box
6"w x 6"d x 4½"t

Controller: Orton 3-Key Digital Controller
    (View Close Up of Controller)    Manual
Optional Controller: Infinite Switch with Analog Pyrometer
    (View Close Up of Controller)     Manual
Construction:
  • 2400° Fire Brick
  • Three-piece Kiln
  • Element In Side Walls
  • Great for Manipulation
  • Large Handle for Moving
  • Uses a 6" Tile Shelf
  • Great for Fusing
  • High Temperature Lid Coating
  • Stainless Steel Jacket
    • Inside Measurements: 6"w x 6"d x 4½"t ( )
    Outside Measurements: 19"w x 12"d x 9½"t
    Electrical Draw: 120 volts, 8 amps
    Electrical Requirements: 120 volts, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 30 pounds         Ship Weight: 40 pounds
    Maximum Temperature: 2000°F



    Warranty

    Fuse Box, Infinite Switch with Analog Pyrometer
    List Price: $350.00
    CDV Price: $287.00
    +UPS shipping: $45.00*
    		 Go to ordering page.


    Fuse Box with 3-Key Digital Controller
    List Price: $550.00
    CDV Price: $451.00
    +UPS shipping: $40.00*
    		 Go to ordering page.
    lampworking torches, Fusemaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Caldera
    • Caldera kiln with optional x-collar
    • Caldera with its lid off
    • Combinations available
    Paragon Kilns

    Caldera
    8"w x 8"d x 6¾"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • Multi-Sectional Kiln
  • 2 ½" Fire Brick
  • Elements In Side Of Kiln
  • Stainless Steel Jacket
    		• This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Inside Measurements: 8"w x 8"d x 6¾"h (0.25 cu ft)
    Outside Measurements: 13" x 19½" x 11¾"
    Electrical Draw: 120 volts, 13 amps
    Electrical Requirements: 120 volts, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 30 pounds         Ship Weight: 40 pounds
    Maximum Temperature: 2000°F

    Comes With:
  • 7" x 7" x 5/8" Kiln Shelf
  • 4 Shelf Posts
  • Bag of Kiln Wash
  • Brick to Set Kiln On
  • Operation Manual

    Warranty

    Digital Caldera
    List Price: $722.00
    CDV Price: $542.00
    +UPS Ground shipping: $50.00*
    Go to ordering page.

    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon GF series kiln
    Paragon Kilns

    Fusion-6
    11"w x 6½"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • 2 ½" Fire Brick
  • Element In Top Of Kiln
  • Stainless Steel Jacket
    		• This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Inside Measurements: 11"d x 6½"h (0.42 cu ft)
    Outside Measurements: 19" x 20" x 12"
    Electrical Draw Top Element: 120 volts, 13 amps
    Electrical Requirements: 120 volt, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 45 pounds         Ship Weight: 100 pounds
    Maximum Temperature: 1700 °F
    Comes With:
  • 10" x ½" Hexagon Kiln Shelf
  • 4 Shelf Posts
  • 9" Metal Kiln Stand
  • Bag of Kiln Wash
  • Operation Manual

    Warranty

    Fusion-6
    List Price: $755.00
    CDV Price: $566.00
    +UPS Shipping: $70.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Bead Annealer
    Bead Annealer
    Jen-Ken Kiln.

    Bead Annealer
       & Fusing Kiln
    11"w x 4½"h



    Controller: Orton 3-Key Digital Controller
        (View Close Up of Controller)    Manual


    Construction:
  • 2½" Fire Brick
  • Stainless Steel Jacket
  • 2½"x 6" opening behind bead door
  • Single Element In The Side Of The Kiln
         (Element cannot be touched by bead
          mandrel through the bead door.)
    Inside Measurements: 11"d x 4½"h (0.27 cu ft) 6-sided
    Outside Measurements: 16" x 22" x 9½"
    Electrical Draw: 120 volt, 13 amps
    Electrical Requirement: 120 volt, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 35 pounds Ship Weight: 50 pounds
    Maximum Temperature: 1700 °F

    Comes With:
  • Kiln Shelf
  • 3 - ½" Shelf Posts
  • 3 - Bricks to set kiln on
  • Bag of glass kiln wash
  • Operation Manual

    Warranty
    		  


    Bead Annealer & Fusing Kiln, 3-key Digital Controller
    List Price: $695.00
    CDV Price: $600.00
    Super Savings Price: $570.00
    (4 week Delivery, Choice of Controllers)
    +UPS shipping: $55.00*
    		 Go to ordering page.
    lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Easy Open Front Load Kiln
    Jen-Ken Kiln.

    Tall Bead Annealer w/Fold Up Door
    11"w x 9"h

    Controller: Orton 3-Key Digital Controller
        (View Close Up of Controller)    Manual


    Construction:
  • 2½" Fire Brick
  • Stainless Steel Jacket
  • Single Element in the Side of the Kiln
         (Element cannot be touched by bead
          mandrel through the bead door.)
  • 4" x 6" Opening Behind Bead Door
    Inside Measurements: 11" x 9" (0.52 cu ft)
    Outside Measurements: 16" x 14"
    Electrical Draw: 120 volts, 13 amps
    Electrical Requirements: 120 volt, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 45 pounds         Ship Weight: 60 pounds
    Maximum Temperature: 1500 °F
    Comes With:
  • Kiln Shelf
  • 3 - ½" Shelf Posts
  • 3 - Bricks to set kiln on
  • Bag of glass kiln wash
  • Operation Manual

    Warranty

    Tall Bead Annealer
    w/Fold Up Door
    List Price: $780.00
    CDV Price: $670.00
    +UPS Ground shipping: $65.00*
    (Ships in One Business Day - Orton Controller only)
    Super Savings Price: $640.00
    (4 week Delivery, Choice of Controllers)

    Go to ordering page.
    lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Jewelry Kiln
    Jen-Ken Kiln.

    Jewelry Kiln
    11"w x 4½"h - NOT "IN STOCK"

    In Stock for immediate shipment

    Controller: Infinite Switch with Analog Pyrometer
        (View Close Up of Controller)     Manual
    Optional Controller: Orton 3-Key Digital Controller
        (View Close Up of Controller)    Manual
    Construction:
  • 2½" Fire Brick
  • Stainless Steel Jacket
  • Single Element In The Side Of The Kiln
    Inside Measurements: 11"d x 4½"h (0.27 cu ft) 6-sided
    Outside Measurements: 16" x 22" x 9½"
    Electrical Draw: 120 volt, 13 amps
    Electrical Requirement: 120 volt, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 35 pounds Ship Weight: 50 pounds
    Maximum Temperature: 1700 °F

    Comes With:
  • Kiln Shelf
  • 3 - ½" Shelf Posts
  • 3 - Bricks to set kiln on
  • Bag of glass kiln wash
  • Operation Manual

    Warranty

    Jewelry Kiln, Infinite Switch with Analog Pyrometer
    List Price: $445.00
    CDV Price: $365.00
    Optional Glass View Window is not available on this model.
    +UPS shipping: $55.00*
    		 Go to ordering page.


    Jewelry Kiln with 3-Key Digital Controller
    List Price: $645.00
    CDV Price: $559.00
    (Ships in One Business Day - Orton Controller only)
    Super Savings Price: $529.00
    (4 week Delivery, Choice of Controllers)
    Optional Glass View Window is not available on this model.
    +UPS shipping: $45.00*
    		 Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Mini-Fusing Kiln
    Jen-Ken Kiln.

    Mini Fuse KilnTM
    11"w x 6½"h

    Controller: Orton 3-Key Digital Controller
        (View Close Up of Controller)   


    Construction:
  • 2½" Fire Brick
  • Stainless Steel Jacket
  • Single Element In The Side Of The Kiln

    Inside Measurements: 11" diameter x 6½"h (0.39 cu ft) 6-sided
    Outside Measurements: 16" x 24" x 13"
    Electrical Draw: 120 volt, 13 amps
    Electrical Requirement: 120 volt, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 45 pounds Ship Weight: 60 pounds
    Maximum Temperature: 1700 °F

    Comes With:
  • Kiln Shelf
  • 3 - ½" Shelf Posts
  • 3 - Bricks to set kiln on
  • Bag of glass kiln wash
  • Operation Manual

    Warranty



    Mini Fuse Kiln with 3-Key Digital Controller
    List Price: $685.00
    CDV Price: $562.00
    Optional 2½" Glass View Window available
    Price: $100.00
    +UPS shipping: $55.00
    lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    129FLE
    Olympic Kilns

    129FLE
    11¼"w x 9"d x 9¾"h

    Controller: Bartlett RTC 1000 12-Key Digital Controller
        (View Close Up of Controller)    Manual 
    The above manual will download as a MSWord DOC


    Construction:
  • Front Load
  • Guillotine Front Door - Optional
  • Punty Door - Standard
  • 2½" Fire Brick
  • Side Elements
  • Stainless Steel Jacket


    Inside Measurements: 11¼"w x 9"d x 9¾"h
    Outside Measurements: 23½"w x 14"d x 22½"h
    Electrical Draw: 120 volt, 15 amps
    Electrical Requirement: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
    Ship Weight: 60 pounds
    Maximum Temperature: 2250 °F

    Comes With:
  • 2 - 9" x 7" Shelves
  • 4 - ½" Shelf Posts
  • 4 - 1" Shelf Posts
  • 4 - 2" Shelf Posts
  • 1 Square Foot Ceramic Paper
  • 1-lb. Bag of Kiln Wash
  • Attached Metal Kiln Stand
  • Operation Manual

    Warranty



    129FL, manual controller
    List Price: $821.70
    CDV Price: $693.00
    +UPS shipping: $80.00
    Go to ordering page.

    129FLE, digital controller
    List Price: $1121.70
    CDV Price: $945.00
    +UPS shipping: $80.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Maxi-Fusing Kiln
    Paragon Kilns

    TnF-J-14-1 Kiln
    13"w x 13"d x 9"h

    Controller: 12-Key Sentry 2.0 Digital Controller
       (View Close Up Of Controller)    Manual (1323K)
    Construction:
  • Ceramic Fiber
  • Elements Embedded in Fiber
  • Painted Steel Cabinet

    Inside Measurements:
    13"w x 13"d x 9"h (0.88 cu ft)
    Outside Measurements: 18"w x 21½"d x 20½"h
    Electrical Draw: 120 volt, 20 amps
    Electrical Requirement: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
     NOTE: This is a special outlet; see photo
    Kiln Weight: 70 pounds Ship Weight: 90 pounds
    Maximum Temperature: 1700 °F

    Comes With:
  • Operation Manual

    (View Close Up of Controller)    Manual (PDF)
    Warranty


    TnF-J-14-1 Kiln with 12-key Sentry 2.0 Digital Controller
    List Price: $1700.00
    CDV Price: $1275.00
    Ships by Motor Freight


    Optional furniture kit: $50.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    146GFETLC
    186TLCclamshell
    Olympic Kilns

    146GFETLC
    14 1/2"w x 6"h

    Controller: Bartlett 12-Key Digital Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • Two Hinge Points for Top Load OR Clamshell
  • 2 ½" Fire Brick
  • Element In Top Of Kiln
  • Stainless Steel Jacket

    Inside Measurements: 14 1/2"w x 6"h
    Outside Measurements: 32"w x 28 ½"d x 29"t
    Electrical Draw: 120 volts, 15 amps
    Electrical Requirement: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
     NOTE: This is a special outlet; see photo
    Kiln Weight: t/c       Ship Weight: 198 pounds
    Maximum Temperature: 1700 °F

    Comes With:
  • 2 - 13" Round Shelves
  • 3 - ½" Shelf Posts
  • 3 - 1" Shelf Posts
  • 3 - 2" Shelf Posts
  • 18" Metal Kiln Stand
  • 1 Square Foot Ceramic Paper
  • 1 lb Bag of Kiln Wash
  • Operation Manual

    Warranty




    146GFETLC
    List Price: $1049.40
    CDV Price: $891.00
    ($60 crating charge included)
    Ships by Motor Freight
    Go to ordering page.


    146GFE with Furniture Kit
    Top load only
    List Price: $847.40
    CDV Price: $790.00
    UPS shipping: $115.00
    Go to ordering page.


    "Champ" Package
    The Olympic 146 with a 3-key controller instead of the 12-key). The furniture kit and shipping are included.
    Controller: Bartlett 3-Key Digital Controller
        (View Close Up of Controller)    Manual 
    The above manual will download as a MSWord DOC
    CDV Price: $835.00
    Shipping included.
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon GF series kiln
    Paragon Kilns

    Fusion-7
    14¼"w x 6½"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • 2 ½" Fire Brick
  • Element In Top Of Kiln
  • Stainless Steel Jacket
    		• This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Inside Measurements: 14¼"w diameter x 6½"h (0.69 cu ft)
    Outside Measurements: 22" x 24½" x 12"
    Electrical Draw Top Element: 120 volts, 15 amps
    Electrical Requirements: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 60 pounds         Ship Weight: 115 pounds
    Maximum Temperature: 1700 °F
    Comes With:
  • 13" Round Kiln Shelf
  • 4 Shelf Posts
  • 9" Metal Kiln Stand
  • Bag of Kiln Wash
  • Operation Manual

    Warranty

    Fusion-7
    List Price: $811.00
    CDV Price: $608.00
    +UPS Shipping: $85.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Hot Start Pro
    Skutt Kilns

    Hot Start Pro
    15"w x 6½"h

    Controller: Orton 3-Key Digital Controller
        (View Close Up of Controller)    Manual


    Construction:
  • 2½" Fire Brick
  • Stainless Steel Jacket
  • Elements In The Lid

    Inside Measurements:
    15" diameter x 6½" h (0.61 cu ft) 7-sided
    Outside Measurements: 20" x 26" x 13"
    Electrical Draw: 115 volt, 15 amps
    Electrical Requirement: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
      Kiln Weight: 65 pounds Ship Weight: 100 pounds
    Maximum Temperature: 1650 °F

    Comes With:
  • 13" Round Kiln Shelf
  • 3 Shelf Posts
  • Bag of kiln wash
  • Shelf paper
  • Metal Kiln Stand
  • Operation Manual

    Warranty


    Hot Start Pro w/kit and Digital Controller
    List Price: $865.00
    CDV Price: $675.00
    +UPS shipping: $85.00*
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Maxi-Fusing Kiln
    Jen-Ken Kiln.

    Maxi Fuse KilnTM
    15"w x 6½"h

    Controller: Orton 3-Key Digital Controller
        (View Close Up of Controller)    Manual
    Construction:
  • 2½" Fire Brick
  • Stainless Steel Jacket
  • Elements In Sides & Lid

    Inside Measurements:
    15" diameter x 6½" h (0.61 cu ft) 7-sided
    Outside Measurements: 20" x 26" x 13"
    Electrical Draw: 120 volt, 17 amps
    Electrical Requirement: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
     NOTE: This is a special outlet; see photo
    Kiln Weight: 60 pounds Ship Weight: 80 pounds
    Maximum Temperature: 1700 °F

    Comes With:
  • 13" Round Kiln Shelf
  • 3 Shelf Posts
  • 9" Metal Kiln Stand
  • Bag of glass kiln wash
  • Operation Manual

    Warranty


    MaxiFuse Kiln with 3-Key Digital Controller
    List Price: $825.00
    CDV Price: $677.00
    Optional 2½" Glass View Window available
    Price: $72.00
    +UPS shipping: $85.00*
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    146GFE_square
    Olympic Kilns

    Square 146GFE
    14½"w x 14½""d x 6"h

    Controller: Bartlett RTC 1000 12-Key Digital Controller
        (View Close Up of Controller)    Manual 
    The above manual will download as a MSWord DOC


    Construction:
  • 2.5" Fire Brick
  • Toggle switches control top and side elements
  • Stainless Steel Jacket


    Inside Measurements: 14½"w x 14½""d x 6"h
    Outside Measurements: 24"w x 24"d x 29"h
    Electrical Draw: 120 volt, 15 amps
    Electrical Requirement: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
    Ship Weight: 128 pounds
    Maximum Temperature: 1800 °F

    Comes With:
  • 1 - 13" x 13" Shelves
  • 3 ea. - ½", 1" and 2" Shelf Posts
  • 1 Square Foot Ceramic Paper
  • 1-lb. Bag of Kiln Wash
  • 18" Metal Kiln Stand
  • Peephole Plug
  • Lid Wedge
  • Operation Manual

    Warranty



    Square 146 GFE
    List Price: $937.40
    CDV Price: $790.00
    +UPS shipping: $115.00
    Go to ordering page.

    Square 146 GFETLC
    Top load and clamshell
    List Price: $1,129.40
    CDV Price: $958.00
    ($60 crating charge included)
    Ships by motor freight
    Go to ordering page.


    "Champ XL" Package
    The Olympic Square 146 with a 3-key controller instead of the 12-key. The furniture kit and shipping are included.
    Controller: Bartlett 3-Key Digital Controller
        (View Close Up of Controller)    Manual 
    The above manual will download as a MSWord DOC
    CDV Price: $950.00
    Shipping included.
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Home Artist Kiln 
    Paragon Kilns

    Home Artist Kiln
    12"d x 12"h

    This kiln will do Ceramics & Glass

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • Ceramic fiber firing chamber
  • Stainless steel jacket is vented for lower surface temperature
  • Safety on/off switch
  • Telescoping luggage carrier
  • Furniture kit
    Inside Measurements: 12"d x 12"h (.78 cu ft)
    Outside Measurements: 18¾"h x 23"d x 16"w
    Electrical Draw: 120 volt, 15 amp
    Electrical Requirement: requires 120 volt, 20 amp
    (NEMA Receptacle #: 5-20R)
    Kiln Weight: 38 pounds     Ship Weight: 47 pounds
    Maximum Temperature: 2000 °F
    Comes with: 1 Year Limited Warranty and Operation Manual

    FSHOME with
    Sentry Xpress digital controller
    List Price: $905.00
    CDV Price: $769.00
    + UPS Shipping: $75.00

    Optional furniture kit: $72.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
     

    Tool Box Type Kiln

    The toolbox type kiln listed below is used ONLY for annealing glass beads or glass sculpture.
    The toolbox type kiln listed below is NOT to be used for fusing, slumping, or precious metal clay.

    Chili Pepper Bead Annealer Kiln
    Click here to see the Chili Pepper Kiln with its door open.
    Jen-Ken Kiln.

    Chili Pepper Bead Annealer
    ( For Annealing Only: Cannot fuse or slump or do PMC )

    Orton 3-Key Digital Controller
        Close-up    Manual

    Construction:
  • 2 - Layers of 1" thick 8-pound fiber blanket (non-carcinogenic)*
  • Steel Tool Box
  • Element Is Encased In Quartz Glass Tube & Mounted At The Top Of The Back Wall
      * The insulation blanket used is Unifrax's Insulfrax 1800 Fiber Blanket, which has been found to be non-carcinogenic. MSDS

    Inside Measurements: 16" wide x 4½" deep x 6"h
    Outside Measurements: 26" x 11½" x 10½"
    Door Opening Measurements: 16" wide x 4½"h
    Electrical Draw: 120 volt, 8.4 amps
    Electrical Requirement: Regular Household Receptacle Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 18½ pounds Ship Weight: 22 pounds
    Maximum SAFE Operating Temperature: 1100 °F

    Warranty


    Chili Pepper Kiln with 3-Key Digital Controller
    List Price: $650.00
    CDV Price: $553.00
    +UPS shipping: $50.00*
    Go to ordering page.


    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon Blue Bird Kiln
    Paragon Kilns

    Paragon Blue Bird Kiln
    (For Annealing Only: Not for fusing, slumping or PMC)
    20"w x 5" h x 5"d

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)


    Construction:
  • Fiber Board Roof, Walls and Floor
  • Element in Pinless Ball Groove in Roof
  • Two 10" x 2¾" Bead Doors
    Inside Measurements: 20"w x 5" h x 5"d (.28 cu ft)
    Outside Measurements: 33½"w x 12½"h x 11½"d
    Electrical Draw: 120 Volts, 8 amps
    Electrical Requirements: 120 volt, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 37 pounds         Ship Weight: 40 pounds
    Maximum Temperature: 1200 °F
    Warranty

    Blue Bird Kiln
    with 3 key Digital Controller
    List Price: $735.00
    CDV Price: $551.00
    +UPS ground shipping: $35.00*

    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon SC-2 kiln
    Paragon Kilns

    SC-2
    8"w x 7 ¾"d x 5 ¾"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • Ceramic Fiber
  • Elements in the Bottom & Sides of the Kiln
  • Painted Steel Cabinet
    Inside Measurements: 8"w x 7¾"d x 5¾"h (0.19 cu ft)
    Outside Measurements: 13¼" x 14" x 15½"
    Electrical Draw: 120 volts, 12 amps
    Electrical Requirements: Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 31 pounds      Ship Weight: 36 pounds
    Maximum Temperature: 2000 °F
    Comes With:
  • ¼"-thick Ceramic Fiber Shelf
  • Operation Manual

    Warranty

    SC-2
    List Price: $700.00
    CDV Price: $595.00
    +UPS shipping: $40.00*
    Go to ordering page.
    • Paragon SC-2 Vista kiln
    SC-2 with Bead Door
    Same as SC-2 except has a bead door.
    List Price: $730.00
    CDV Price: $621.00
    +UPS shipping $50.00*
    Go to ordering page.
    Paragon SC-2 Vista kiln
    SC-2 Vista with Glass View Window
    Same as SC-2 except has 2" glass view window in door.
    List Price: $750.00
    CDV Price: $638.00
    +UPS shipping $50.00*
    Go to ordering page.
    SC-2 with Window and Bead Door
    List Price: $765.00
    CDV Price: $650.00
    +UPS shipping $50.00*
    Go to ordering page.
    lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon SC series kiln
    Paragon Kilns

    SC-3
    7¾"w x 8"d x 7¾"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • Ceramic Fiber
  • Elements in the Back & Both Sides of the Kiln
  • Painted Steel Cabinet
    Inside Measurements: 7¾"w x 8"d x 7¾"h (0.28 cu ft)
    Outside Measurements: 13¼" x 14" x 17"
    Electrical Draw: 120 volts, 15 amps
    Electrical Requirements: Regular Household Electric Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 36 pounds     Ship Weight: 41 pounds
    Maximum Temperature: 2000 °F
    Comes With:
  • ¼"-thick Ceramic Fiber Shelf
  • Operation Manual

    Warranty

    SC-3 Digital Kiln
    List Price: $790.00
    CDV Price: $672.00
    +UPS shipping: $50.00*
    Go to ordering page.
    SC-3 with Bead Door
    Same as SC-3 except has a bead door.
    List Price: $820.00
    CDV Price: $697.00
    +UPS shipping $50.00*
    Go to ordering page.
    SC-3 Vista with Glass View Window
    Same as SC-3 except has 2" glass view window in door.
    List Price: $840.00
    CDV Price: $714.00
    +UPS shipping $50.00*
    Go to ordering page.
    SC-3 with Window and Bead Door
    List Price: $855.00
    CDV Price: $727.00
    +UPS shipping $50.00*
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Easy Open Front Load Kiln
    Paragon Kilns

    Easy Open Front Load Kiln
    8½"w x 12"d x 6"h

    3-key Sentry Digital Controller
       View Close Up Of Controller     Manual (750K)
    Construction:
  • 2½" Fire Brick
  • Element in sides
  • Door Swings Open with Quick Release Lever
  • Safety Shut-Off Switch When Door is Opened
    Inside Measurements: 8½" x 12" x 6" (0.35 cu ft)
    Outside Measurements: 14" x 17" x 17"
    Electrical Draw: 120 volts, 15 amps
    Electrical Requirements: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 47 pounds         Ship Weight: 75 pounds
    Maximum Temperature: 2300 °F
    Comes With:
  • Operation Manual

    Warranty

    Easy Open Front Load Kiln
    List Price: $855.00
    CDV Price: $641.00
    Ships by UPS: $70.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    GM10F Kiln
    Skutt Kilns

    GM10F
    10"w x 9"d x 9"h

    GlassMaster Digital Controller
        (View Close Up of Controller)    Manual
    This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Construction:
  • 2 ½" Fire Brick
  • Elements In Sides and Back
  • Stainless Steel Jacket
  • Built In Stand
    Inside Measurements: 10"w x 9"d x 9"h (0.45 cu ft)
    Outside Measurements: 24"w x 18"d x 16"h
    Electrical Draw: 115 volts, 15 amps
    Electrical Requirement: 120 volt, 20 amp (NEMA receptacle # 5-20R)
    Kiln Weight: 55 pounds         Ship Weight: 82 pounds
    Maximum Temperature: 1800 °F

    Comes With:
  • 8" x 9" Kiln Shelf
  • 3 Shelf Posts
  • Bag of Glass Kiln Wash

    Warranty

    GM10F with Solid Door
    List Price: $1020.15
    CDV Price: $795.72
    Ships by UPS Heavy Weight
    +Shipping $90.00
    Go to ordering page.

    GM10FB with Bead Door
    List Price: $1061.15
    CDV Price: $827.70
    Ships by UPS Heavy Weight
    +Shipping $90.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Pyromaster Front Load Kilns

    Pyromaster Front Load Kilns

    Pyromaster Front Load Kilns
    Paragon Kilns

    F-120
    10¾"w x 11"d x 7"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • 2 ½" Fire Brick
  • Element In The Top
  • Door Has 10" Fold Up Punty Slot
    Inside Measurements: 10¾"w x 11"d x 7"h
    Outside Measurements: 20½"w x 23"d x 20"h
    Electrical Draw: 120 volt, 14 amps
    Electrical Requirement: Regular Household Electric Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 85 pounds Ship Weight: 135 pounds
    Maximum Temperature: 1800 °F
    Comes With:
  • Operation Manual

    Warranty

    F-120
    List Price: $1300.00
    CDV Price: $975
    Ships by Motor Freight
    Optional furniture kit: $39.00
  • 10" Square Kiln Shelf
  • 4 Shelf Posts
  • Glass Kiln Wash
    		•
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    1210 FLE
    Olympic Kilns

    1210 FLE
    12"w x 12"d x 10"h

    Controller: Bartlett 3-Key Digital Controller
        (View Close Up of Controller)    Manual 
    The above manual will download as a MSWord DOC


    Construction:
  • 2 ½" Fire Brick
  • Element In Top Of Kiln
    Inside Measurements: 12"w x 12"d x 10"h
    Outside Measurements: 17 ½"w x 29"d x 22 ½"t
    Electrical Draw: 120 volt, 15 amps
    Electrical Requirement: Regular Household Electric Use the right plug with this kiln for safety's reasons!
    Kiln Weight: TBA Ship Weight: 172 pounds
    Maximum Temperature: 1700 °F
    Comes With:
  • 2 - 9" x 7" Shelves
  • 4 - ½" Shelf Posts
  • 4 - 1" Shelf Posts
  • 4 - 2" Shelf Posts
  • 1 Square Foot Ceramic Paper
  • 1 lb Bag of Kiln Wash
  • Operation Manual

    Warranty


    1210FLE with Furniture Kit
    List Price: $1158.70
    CDV Price: $973.00
    Ships by Motor Freight
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    *Where shipping cost is mentioned,
    continental US only.
    Prices updated - subject to change without notice.
    *Where shipping cost is mentioned, continental US only.
    Centre DeVerre LLC




    Centre DeVerre
    3 Robinson Road, Unit A2    Directions
    Bow, NH 03304

    Monday-Friday, 9 a.m. - 5 p.m. Eastern
    2nd Saturday of month, 10 a.m. - 1 p.m. Eastern. We will be closed Thurs/Fri November 27-28 for Thanksgiving.

    Toll free: ( 800 ) 958-5319
    Phone: ( 603 ) 228-2900
     Fax: ( 603 ) 228-2905
    Email: cdvcom@verizon.net