Medium  Returns & Cancellation Policy  
Glass Kilns

Crucible Kilns

 
General Kiln Operation Manual General Kiln Operation Manual
Care and Use of Crucibles Care and Use of Crucibles
Crucible Kiln-11
Jen-Ken Kiln.

Crucible-11
11"w x 9"h

Controller: Orton 3-Key Digital Controller
    (View Close Up of Controller)    Manual
Construction:
  • Six Sided
  • 2½" Fire Brick
  • Stainless steel jacket
  • Full aluminum bottom
  • Safety Shut-Off Switch When Lid Is Opened
  • Two Side Elements. Lewis Wilson Instructional Video
    Inside Measurements: 11"d x 9"h
    Outside measurements: 16"w x 22"d x 14"h
    Electrical Draw: 240 volt, 17 amps
    Electrical Requirements: 240 volt, 20 amps
    (NEMA Receptacle #: 6-20R)
    Kiln Weight: 50 Pounds Shipping Weight: 65 pounds
    Maximum Temperature: 2300 °F.
    Comes with:
  • 3 - 7-pound Crucibles
  • Fiber Blanket Crucible Shield
  • 9" Kiln Shelf
  • 3 Shelf Posts
    Warranty

    Crucible-11
    List Price: $905.00
    CDV Price: $815.00
    Ships by Motor Freight
    Optional Bartlett 12-Key Controller         $150.00     		Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Crucible Kiln-18
    Jen-Ken Kiln.

    Crucible-18
    18"w x 9"h

    Controller: Orton 3-Key Digital Controller
        (View Close Up of Controller)    Manual
    Construction:
  • 3" Fire Brick Sides
  • 2½" Fire Brick Top
  • Stainless steel jacket
  • Full aluminum bottom
  • Safety Shut-Off Switch When Lid Is Opened
  • Four Side Elements.
    Inside Measurements: 18"d x 9"h
    Outside measurements: 23"w x 29"d x 14"h
    Electrical Draw: 240 volt, 30 amps
    Electrical Requirements: 240 volt, 50 amps
    (NEMA Receptacle #: 6-50R)
    Kiln Weight: 105 Pounds Shipping Weight: 140 pounds
    Maximum Temperature: 2300 °F
    Comes with:
  • Fiber Blanket Crucible Shield
  • 15½" Kiln Shelf
  • 3 Shelf Posts
    Note: This kiln does NOT come with any crucibles.

    Warranty

    Crucible-18
    List Price: $1255.00
    CDV Price: $1130.00
    Ships by Motor Freight
    Optional Bartlett 12-Key Controller         $150.00
    Go to ordering page.


    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Professional Crucible-1918
    Jen-Ken Kiln.

    Professional Crucible-1918
    19"w x 18"h

    Orton 12-Key Digital Controller
        (View Close Up of Controller)    Manual
    This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Construction:
  • 5" Fire Brick Sides (Double 2½" Fire Brick Walls)
  • Double Lids (One Solid & One Donut)
  • 2½" Fire Brick Bottom
  • Stainless steel jacket
  • Full aluminum bottom
  • Safety Shut-Off Switch When Lid Is Opened
  • Side Elements.
    Inside Measurements: 19"d x 18"h
    Outside measurements: 29"w x 35"d x 25½"h
    Electrical Draw: 240 volt, 36 amps
    Electrical Requirements: 240 volt, 50 amps
    (NEMA Receptacle #: 6-50R)
    Kiln Weight: 300 Pounds   Shipping Weight: 375 pounds
    Maximum Temperature: 2300 °F
    Comes with:
  • Fiber Blanket Crucible Shield
  • 15½" Kiln Shelf
  • 5 - ½" Shelf Posts
  • Operation Manual
    Note: This kiln does NOT come with any crucibles.

    Warranty

    Crucible-1918
    List Price: $2405.00
    CDV Price: $2165.00
    Ships by Motor Freight
    Go to ordering page.


    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Vulcan Kiln
    Paragon Kilns

    Vulcan Kiln
    13½"w x 18"h

    Sentry 2.0 Digital Controller
       (View Close Up Of Controller)    Manual
    This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Construction:
  • Heavy 12-gauge elements
  • S-Type thermocouple
  • Separate bottom section limits damage from a glass spill during firing
  • 4½" thick insulating refractory firebrick walls
  • Sidewall elements in dropped, recessed brick grooves are easy to replace
  • A steel floor pan supports the entire brick bottoom of each kiln
  • Lock-in lid support and lid chain
  • Heavy duty stand
  • One-year limited warranty
    Inside Measurements: 13½ x 18"h
    Outside measurements: 25½"w x 28¼d x 34"h
    Electrical Draw: 240 volt, 17 amps
    Electrical Requirements: 240 volt, 30 amps
    (NEMA Receptacle #: 6-30R)
    Kiln Weight: 240 Pounds   Shipping Weight: 300 pounds
    Maximum Temperature: 2350 °F
    Comes with:
  • 2" Thick Fiberboard Crucible Shield
  • Operation Manual
    Note: This kiln does NOT come with any crucibles.

    Warranty

    Vulcan kiln
    Digital Automatic
     List Price: $2220.00
    CDV Price: $1887.00
    Ships by Motor Freight
    Optional crucible shelf and posts: $19.90
  • 10" round shelf
  • 4 - 1" high posts
    		•
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    *Where shipping cost is mentioned,
    continental US only.
    Prices effective - subject to change without notice.
    Where UPS shipping is included, continental US only.
    Centre DeVerre




    Centre DeVerre
    3 Robinson Road, Unit A2    Directions
    Bow, NH 03304

    Monday-Friday, 9 a.m. - 5 p.m. Eastern
    2nd Saturday of month, 10 a.m. - 1 p.m. Eastern. We will be closed Thurs/Fri November 27-28 for Thanksgiving.

    Toll free: ( 800 ) 958-5319
    Phone: ( 603 ) 228-2900
    Fax: ( 603 ) 228-2905
    Email: cdvcom@verizon.net