Medium  Returns & Cancellation Policy  
Glass Kilns

Front Load Kilns

 

Tool Box Type Kiln

The toolbox type kiln listed below is used ONLY for annealing glass beads or glass sculpture.
The toolbox type kiln listed below is NOT to be used for fusing, slumping, or precious metal clay.

Chili Pepper Bead Annealer Kiln
Click here to see the Chili Pepper Kiln with its door open.
Jen-Ken Kiln.

Chili Pepper Bead Annealer
( For Annealing Only: Cannot fuse or slump or do PMC )

Orton 3-Key Digital Controller
    Close-up    Manual

Construction:
  • 2 - Layers of 1" thick 8-pound fiber blanket (non-carcinogenic)*
  • Steel Tool Box
  • Element Is Encased In Quartz Glass Tube & Mounted At The Top Of The Back Wall
      * The insulation blanket used is Unifrax's Insulfrax 1800 Fiber Blanket, which has been found to be non-carcinogenic. MSDS

    Inside Measurements: 16" wide x 4½" deep x 6"h
    Outside Measurements: 26" x 11½" x 10½"
    Door Opening Measurements: 16" wide x 4½"h
    Electrical Draw: 120 volt, 8.4 amps (1008 watts)
    Electrical Requirement: Regular Household Receptacle Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 18½ pounds Ship Weight: 22 pounds
    Maximum SAFE Operating Temperature: 1100 °F

    Warranty


    Chili Pepper Kiln with 3-Key Digital Controller
    List Price: $650.00
    CDV Price: $553.00
    +UPS shipping: $35.00*
    Go to ordering page.


    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon Blue Bird Kiln
    Paragon Kilns

    Paragon Blue Bird Kiln
    (For Annealing Only: Not for fusing, slumping or PMC)
    20"w x 5" h x 5"d

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)


    Construction:
  • Fiber Board Roof, Walls and Floor
  • Element in Pinless Ball Groove in Roof
  • Two 10" x 2¾" Bead Doors
    Inside Measurements: 20"w x 5" h x 5"d (.28 cu ft)
    Outside Measurements: 33½"w x 12½"h x 11½"d
    Electrical Draw: 120 Volts, 8 amps
    Electrical Requirements: 120 volt, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 37 pounds         Ship Weight: 40 pounds
    Maximum Temperature: 1200 °F
    Warranty

    Blue Bird Kiln
    with 3 key Digital Controller
    List Price: $735.00
    CDV Price: $551.00
    +UPS ground shipping: $35.00*

    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Tall Bead Annealer
    Jen-Ken Kiln.

    Tall Bead Annealer w/Fold Up Door
    11"w x 9"h

    In Stock for immediate shipment
    Orton 3-Key Digital Controller
        (View Close Up of Controller)    Manual
  • 2½" Fire Brick
  • Stainless Steel Jacket
  • Single Element in the Side of the Kiln
         (Element cannot be touched by bead
          mandrel through the bead door.)
  • 4" x 6" Opening Behind Bead Door
    Inside Measurements: 11" x 9" (0.52 cu ft)
    Outside Measurements: 16" x 14"
    Electrical Draw: 120 volts, 13 amps (1800 watts)
    Electrical Requirements: 120 volt, 15 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 45 pounds         Ship Weight: 60 pounds
    Maximum Temperature: 1500 °F
    Comes With:
  • Kiln Shelf
  • 3 - ½" Shelf Posts
  • 3 - Bricks to set kiln on
  • Bag of glass kiln wash
  • Operation Manual

    Warranty

    Tall Bead Annealer
    w/Fold Up Door
    List Price: $780.00
    CDV Price: $670.00
    (Ships in One Business Day - Orton Controller only)
    Super Savings Price: $640.00
    (4 week Delivery, Choice of Controllers)
    UPS shipping: $50.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon SC-2 kiln
    Paragon Kilns

    SC-2
    8"w x 7 ¾"d x 5 ¾"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • Ceramic Fiber
  • Elements in the Bottom & Sides of the Kiln
  • Painted Steel Cabinet
    Inside Measurements: 8"w x 7¾"d x 5¾"h (0.19 cu ft)
    Outside Measurements: 13¼" x 14" x 15½"
    Electrical Draw: 120 volts, 12 amps
    Electrical Requirements: Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 31 pounds      Ship Weight: 36 pounds
    Maximum Temperature: 2000 °F
    Comes With:
  • ¼"-thick Ceramic Fiber Shelf
  • Operation Manual

    Warranty

    SC-2
    List Price: $700.00
    CDV Price: $595.00
    +UPS shipping: $40.00*
    Go to ordering page.
    • Paragon SC-2 Vista kiln
    SC-2 with Bead Door
    Same as SC-2 except has a bead door.
    List Price: $730.00
    CDV Price: $621.00
    +UPS shipping $40.00*
    Go to ordering page.
    Paragon SC-2 Vista kiln
    SC-2 Vista with Glass View Window
    Same as SC-2 except has 2" glass view window in door.
    List Price: $750.00
    CDV Price: $638.00
    +UPS shipping $40.00*
    Go to ordering page.
    SC-2 with Window and Bead Door
    List Price: $765.00
    CDV Price: $650.00
    +UPS shipping $40.00*
    Go to ordering page.
    lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon SC series kiln
    Paragon Kilns

    SC-3
    7¾"w x 7½"d x 7¾"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • Ceramic Fiber
  • Elements in the Back & Both Sides of the Kiln
  • Painted Steel Cabinet
    Inside Measurements: 7¾"w x 7½"d x 7¾"h (0.28 cu ft)
    Outside Measurements: 13¼" x 14" x 17"
    Electrical Draw: 120 volts, 15 amps (1800 watts)
    Electrical Requirements: Regular Household Electric Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 36 pounds     Ship Weight: 41 pounds
    Maximum Temperature: 2000 °F
    Comes With:
  • ¼"-thick Ceramic Fiber Shelf
  • Operation Manual

    Warranty

    SC-3 Digital Kiln
    List Price: $790.00
    CDV Price: $672.00
    +UPS shipping: $40.00*
    Go to ordering page.
    SC-3 with Bead Door
    Same as SC-3 except has a bead door.
    List Price: $820.00
    CDV Price: $697.00
    +UPS shipping $40.00*
    Go to ordering page.
    SC-3 Vista with Glass View Window
    Same as SC-3 except has 2" glass view window in door.
    List Price: $840.00
    CDV Price: $714.00
    +UPS shipping $40.00*
    Go to ordering page.
    SC-3 with Window and Bead Door
    List Price: $855.00
    CDV Price: $727.00
    +UPS shipping $40.00*
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Easy Open Front Load Kiln
    Paragon Kilns

    Easy Open Front Load Kiln
    8½"w x 12"d x 6"h

    3-key Sentry Digital Controller
       View Close Up Of Controller     Manual (750K)
    Construction:
  • 2½" Fire Brick
  • Element in sides
  • Door Swings Open with Quick Release Lever
  • Safety Shut-Off Switch When Door is Opened
    Inside Measurements: 8½" x 12" x 6" (0.35 cu ft)
    Outside Measurements: 14" x 17" x 17"
    Electrical Draw: 120 volts, 15 amps (1800 watts)
    Electrical Requirements: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 47 pounds         Ship Weight: 75 pounds
    Maximum Temperature: 2000 °F
    Comes With:
  • Operation Manual

    Warranty

    Easy Open Front Load Kiln
    List Price: $855.00
    CDV Price: $641.00
    Ships by UPS: $70.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    GM10F Kiln
    Skutt Kilns

    GM10F
    10"w x 9"d x 9"h

    GlassMaster Digital Controller
        (View Close Up of Controller)    Manual
    This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Construction:
  • 2 ½" Fire Brick
  • Elements In Sides and Back
  • Stainless Steel Jacket
  • Built In Stand
    Inside Measurements: 10"w x 9"d x 9"h (0.45 cu ft)
    Outside Measurements: 24"w x 18"d x 16"h
    Electrical Draw: 115 volts, 15 amps (1725 watts)
    Electrical Requirement: 120 volt, 20 amp (NEMA receptacle # 5-20R)
    Kiln Weight: 55 pounds         Ship Weight: 82 pounds
    Maximum Temperature: 1800 °F

    Comes With:
  • 8" x 9" Kiln Shelf
  • 3 Shelf Posts
  • Bag of Glass Kiln Wash

    Warranty

    GM10F with Solid Door
    List Price: $1021.00
    CDV Price: $796.00
    Ships by UPS Heavy Weight
    +Shipping $78.00
    Go to ordering page.

    GM10FB with Bead Door
    List Price: $1062.00
    CDV Price: $828.00
    Ships by UPS Heavy Weight
    +Shipping $78.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Pyromaster Front Load Kilns

    Pyromaster Front Load Kilns

    Pyromaster Front Load Kilns
    Paragon Kilns

    F-120
    10¾"w x 11"d x 7"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    Construction:
  • 2 ½" Fire Brick
  • Element In The Top
  • Door Has 10" Fold Up Punty Slot
    Inside Measurements: 10¾"w x 11"d x 7"h
    Outside Measurements: 20½"w x 23"d x 20"h
    Electrical Draw: 120 volt, 14 amps (1,680 watts)
    Electrical Requirement: Regular Household Electric Use the right plug with this kiln for safety's reasons!
    Kiln Weight: 85 pounds Ship Weight: 135 pounds
    Maximum Temperature: 1800 °F
    Comes With:
  • Operation Manual

    Warranty

      F-120
      List Price: $1260.00
      CDV Price: $945.00
      Ships by Motor Freight
      Optional furniture kit: $39.00
    • 10" Square Kiln Shelf
    • 4 - Shelf Posts
    • Glass Kiln Wash
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Maxi-Fusing Kiln
    Paragon Kilns

    TnF-J-14-1 Kiln
    13"w x 13"d x 9"h

    Controller: 12-Key Sentry 2.0 Digital Controller
       (View Close Up Of Controller)    Manual (1323K)
    Construction:
  • Ceramic Fiber
  • Elements Embedded in Fiber
  • Painted Steel Cabinet

    Inside Measurements:
    13"w x 13"d x 9"h (0.88 cu ft)
    Outside Measurements: 18"w x 21½"d x 20½"h
    Electrical Draw: 120 volt, 20 amps (2400 watts)
    Electrical Requirement: 120 volt, 20 amps Use the right plug with this kiln for safety's reasons!
     NOTE: This is a special outlet; see photo
    Kiln Weight: 70 pounds Ship Weight: 90 pounds
    Maximum Temperature: 1700 °F

    Comes With:
  • Operation Manual

    Warranty


    TnF-J-14-1 Kiln with 12-key Sentry 2.0 Digital Controller
    List Price: $1700.00
    CDV Price: $1275.00
    Ships by Motor Freight

    Optional furniture kit: $50.00
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    1210 FLE
    Olympic Kilns

    1210 FLE
    12"w x 12"d x 10"h

    Controller: Bartlett 3-Key Digital Controller
        (View Close Up of Controller)    Manual 
    The above manual will download as a MSWord DOC


    Construction:
  • 2 ½" Fire Brick
  • Element In Top Of Kiln
    Inside Measurements: 12"w x 12"d x 10"h
    Outside Measurements: 17 ½"w x 29"d x 22 ½"t
    Electrical Draw: 120 volt, 15 amps
    Electrical Requirement: Regular Household Electric Use the right plug with this kiln for safety's reasons!
    Kiln Weight: TBA Ship Weight: 172 pounds
    Maximum Temperature: 1700 °F
    Comes With:
  • 2 - 9" x 7" Shelves
  • 4 - ½" Shelf Posts
  • 4 - 1" Shelf Posts
  • 4 - 2" Shelf Posts
  • 1 Square Foot Ceramic Paper
  • 1 lb Bag of Kiln Wash
  • Operation Manual

    Warranty


    1210FLE with Furniture Kit
    List Price: $1158.70
    CDV Price: $973.00
    Ships by Motor Freight
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Vertically opening door (guillotine style)
    Paragon Kilns

    F-240
    18"w x 18"d x 13"h

    3-Key Sentry Express 4.0 Controller
        (View Close Up of Controller)    Manual (PDF)
    This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Construction:
  • 2 ½" Fire Brick & 2" Fiber Board
  • Top Elements Only
  • Door Has 2 - 8" Fold Up Punty Slots
    Inside Measurements: 18"w x 18"d x 13"h
    Outside Measurements: 29"w x 32"d x 28½"h
    Electrical Draw: 240 volt, 20 amps (4,800 watts)
    Electrical Requirement: 240 volt, 20 amps
    (NEMA Receptacle #: 6-20R)
    Kiln Weight: 260 pounds Ship Weight: 320 pounds
    Maximum Temperature: 1800 °F
    Comes With:
  • Operation Manual

    Warranty

    F-240
    List Price: $2150.00
    CDV Price: $1613.00
    Ships by Motor Freight

    Optional side elements: $200.00
    (Side elements are highly recommended for fusing & slumping.)

    Optional furniture kit: $60.00
  • Kiln Shelf
  • Shelf Posts
  • Glass Kiln Wash
    		•
    Go to ordering page.
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon GL24
    Paragon Kilns

    GL-18AD
    18"w x 18"d x 13"h

    Orton Sentry 2.0 Digital Controller
       (View Close Up Of Controller)    Manual
    This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Construction:
  • 2 ½" Fire Brick
  • Element In Top Of Kiln
  • Painted Steel Cabinet
    Inside Measurements: 18"w x 18"d x 13"h (2.44 cu ft)
    Outside Measurements: 34½"w x 28"d x 25½"h
    Electrical Draw Top Element: 240 volts, 20 amps (4800 watts)
    Electrical Requirements: 240 volt, 20 amps
    (NEMA Receptacle #: 6-20R)
    Electrical Draw TSD Elements: 240 volts, 45 amps (10,800 watts)
    Electrical Requirements: 240 volt, 50 amps
    (NEMA Receptacle #: 6-50R)
    See option below regarding TSD elements.
    Kiln Weight: 245 pounds         Ship Weight: 325 pounds
    Maximum Temperature: 1700 °F
    Comes With:
  • Operation Manual

    Warranty

    GL-18AD
    List Price: $1860.00
    CDV Price: $1395.00
    Ships by Motor Freight
    Go to ordering page.
    GL-18ADTSD
    Same as GL-18AD except the kiln has elements
    in the top, on 3 sides and in door.
    List Price: $2160.00
    CDV Price: $1620.00
    Ships by Motor Freight
    Go to ordering page.
    Optional furniture kit: $115.00
  • Kiln Shelf
  • Shelf Posts
  • Glass Kiln Wash
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Paragon GL24
    Paragon Kilns

    GL-24AD
    25"w x 23"d x 15"h

    Orton Sentry 2.0 Digital Controller
      
    (View Close Up Of Controller)    Manual
    This manual is a PDF file, which requires the Adobe Acrobat reader, available free of charge at Adobe's Acrobat download page.
    Construction:
  • 2 ½" Fire Brick
  • Element In Top Of Kiln
  • Painted Steel Cabinet
    Inside Measurements: 25"w x 23"d x 15"h (5 cu ft)
    Outside Measurements: 40½"w x 32"d x 26¼"h
    Electrical Draw Top Element: 240 volts, 37 amps (8880 watts)
    Electrical Requirements: 240 volt, 50 amps
    (NEMA Receptacle #: 6-50R)
    Electrical Draw TSD Elements: 240 volts, 45 amps (10,800 watts)
    Electrical Requirements: 240 volt, 50 amps
    (NEMA Receptacle #: 6-50R)
    See option below regarding TSD elements.
    Kiln Weight: 345 pounds         Ship Weight: 425 pounds
    Maximum Temperature: 1700 °F
    Comes With:
  • Operation Manual

    Warranty

    GL-24AD
    List Price: $2495.00
    CDV Price: $1871.00
    Ships by Motor Freight
    Go to ordering page.
    GL-24ADTSD
    Same as GL-24AD except the kiln has elements
    in the top, on 3 sides and in door.
    List Price: $2935.00
    CDV Price: $2201.00
    Ships by Motor Freight
    Go to ordering page.
    Optional furniture kit: $160.00
  • Kiln Shelf
  • Shelf Posts
  • Glass Kiln Wash


    Option: Fiber Top $475.00
    • lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    Deluxe GL Kiln Stand

    Paragon GL Series Kiln Stand

    Option: Deluxe GL Kiln Stand 30 ¼" square x 30 ¾" tall Stand Weight: 150 pounds.
    Kiln Stand Without Wheels
    Price: $340.00
    Ships by Motor Freight
    Go to ordering page.
    Kiln Stand With Wheels
    Price: $400.00
    Ships by Motor Freight
    Go to ordering page.
    lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    *Where shipping cost is mentioned,
    continental US only.
    Prices effective - subject to change without notice.
    Where UPS shipping is included, continental US only.
    Centre DeVerre




    Centre DeVerre
    3 Robinson Road, Unit A2    Directions
    Bow, NH 03304

    Monday-Friday, 9 a.m. - 5 p.m. Eastern
    2nd Saturday of month, 10 a.m. - 1 p.m. Eastern. We will be closed Thurs/Fri November 27-28 for Thanksgiving.

    Toll free: ( 800 ) 958-5319
    Phone: ( 603 ) 228-2900
    Fax: ( 603 ) 228-2905
    Email: cdvcom@verizon.net