Dyna-Glow Element Holders
|
||
 |
This is a photograph of an L&L kiln after three years in operation at a busy art center. See how clean the interior of the kiln is? Below is is a photograph of a competitor's kiln interior after three years in the same art center used under the same conditions as the L&L kiln. See how the firebrick is breaking up and the elements are falling out of the firebrick grooves? Both photographs were taken at the Wallingford Art Center and are unretouched. |
|
 |
||
|
Click here to see what an element holder looks like. 1 Protect soft fragile firebrick. Replacing elements does not damage brick. Elements don’t sag or fall out of grooves. No pins are necessary. Customers say their L&L kilns look new after 30 years of hard use! 2 Have a hard, smooth surface which allows the elements to expand and contract freely. No loose brick particles will fall into the kiln and ruin ware. Element life is longer because elements do not get easily snagged, bunched-up, and burned-out. Also, it is harder for glaze, clay particles and firebrick to touch and damage elements.. 3 The thin, dense walls of the holders reflect infrared heat into the kiln. Elements operate at a lower temperature relative to the internal kiln temperature. L&L kilns require less firebrick insulation to be cut out which increases insulating ability, energy efficiency and strength of the kiln.
| ||
